View topic - Article: Diesel Power in a DeSoto

It is currently Fri Nov 16, 2018 10:16 am

All times are UTC [ DST ]

Forum rules

The purpose of the National DeSoto Club, Inc. (NDC), is to encourage the preservation, restoration and promotion of all De Soto automobiles, as well as to promote fellowship and the exchange of knowledge among all fellow members. Furthermore, the study, compilation of data, summary of information, and preservation of literature related to De Soto automobiles is encouraged. The NDC’s message board is open to all. The NDC’s Trustees and members are NOT responsible for the accuracy of any of the information posted to this message board. The NDC’s web-master may, at his/her discretion, remove any message that is deemed to be offensive, and deny posting privileges to the person who posted the offensive message.

Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Tue Oct 31, 2017 1:11 am 

Joined: Mon Aug 09, 2010 6:43 pm
Posts: 980
From here:

Leon Eckery has been messing with cars all his life and he’s been through a number of hot rods, and did his share of drag racing, rock crawling, SCCA racing, and even motorcycles. What intrigued him lately, as well as his son Warren, was land speed racing. And Pikes Peak. And Power Tour, along with One Lap of America. They needed a car to do it all…and one that would be different.

You see, Leon admits to having a penchant for different when it comes to cars, trucks and even motorcycles. In fact, one friend dubbed his driveway ‘the land of the misfit toys’! So when a 1956 Desoto Fireflight came into his life, a plan started to develop.

Actually, it was his son Warren who brought up the prospect of building something with diesel power to net the most bang for their buck, plus it was different. In looking at the Desoto parked in the yard, the thought of dropping a Duramax drivetrain into the forlorn 1956 kind of made a sense (in Leon’s mind).

Leon found a running and driving 2003 2500HD Chevy pickup with over 200,000 miles to serve as a driveline donor. At first, they thought they were just going to need to rework the chassis of the Desoto a bit, and beef things up underneath to get the drivetrain fit. Soon though, they realized that the 1956 chassis was never going to live up to the demands of that kind of torque, power and weight.

More thinking, measuring and imagining ensued until their buddy and builder Shawn Petta of Function Fab determined that they could modify the truck chassis and, in theory, drop the body in place. The Duramax was stripped down to the running chassis and required electronics.

Obviously the wheelbase of the two vehicles was different and rather than cut a section out to the middle, it was decided to reposition the rear axle forward on the existing frame. From there, Shawn built a custom rear suspension system consisting of a heavy duty truck 4-link system supported with QA1 coilovers as well as a Watts linkage to reduce the side-to-side movement.

Meanwhile, the Desoto body was pulled apart with the floor cut away to see where it would all come to rest on the chassis. The body was kept in its aged patina experience except for a couple minor modifications. In the rear, the quarter panels were sliced a bit to make changing the rear wheels a lot easier and made to resemble something of a fender skirt.

Leon had Dan Moschkaw update the headstuds of the stock Duramax with a set from ARP and replace the injectors, filters and pump with FASS components. Warren added a 64mm Stealth Turbo, and used a set of open manifolds and downpipe. A little tuning was required with the new 2.47 gears coupled to a Gear Vendors Under/Overdrive unit that puts the final drive at 1.3:1 (with the rpm at about 2,800). Rod Coddens (aka Idaho Rob) of Adrenaline Truck Performance took to the task with his trusty laptop and EFI Live programming.

What was originally thought to be a 12-18 month build ended up running more than four years. But patience pays off and the Desotomaxx was not only done, but it was done right and ready to race.

Leon and Warren have run the DesotoMaxx at El Mirage three times now turning in consistent 146 mph passes. It seems that they found their wall of air for the 7,200 pound brick and need more power to get through it. In 2017, they tackled the Big Bend Open Road Race which is a 59-mile run from Ft. Stockton to Sanderson and back in west Texas. They ended up running third in their 100 mph target class as well as bringing home the trophy for Most Unique Vehicle.

For 2018, the plan is to head to Bonneville and shoot for a 200 mph pass, but first there will be serious updates to the drivetrain. To answer that call, a new engine is being built at Scoggin Dickey Parts Center Raceshop based on an all new Duramax block.

“The car doesn’t really fit any classes to go for a record in the SCTA, so 200 is more of a personal goal,” Leon told us.

Records or not, Leon and Warren have already hit their number one goal of having something completely unique at the race track and on the road.

The online article includes a link to 65 photos of the car before, during and after the build process.


Desotomaxx-50.jpg [ 33.8 KiB | Viewed 1108 times ]
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC [ DST ]

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group