View topic - 1956 DeSoto Fireflite Sportsman Hardtop

It is currently Sat Nov 10, 2018 2:06 am

All times are UTC [ DST ]

Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Fri Aug 18, 2017 4:17 am 
User avatar

Joined: Wed Nov 28, 2012 12:06 pm
Posts: 61
History of the car:
According to FCA, the car was sold new at Wheeler Motor Co. in Ada, OK. The ten years following are still currently unknown as I have not found a way to track down the original owner or owners. Nevertheless, the car did not have an easy first ten years because by about 1966, the car ended up in an Oklahoma junkyard. From tearing down the engine later on and finding a badly bent crank and a broken main cap (shown below), I would have to say that someone was really beating on the car and that's why it ended up in a junkyard. Anyhow, after only about a year of being in the yard, a fellow named Bob Merritt from Kansas bought the car (amongst other salvageable cars) and stashed it in a building. The car sat until sometime in the late seventies/early eighties when the building collapsed from snow on the roof. Several cars were totaled while others only suffered minor damage. The DeSoto ended up with a crushed roof and a large dent across the hood and passenger fender. At this point, the car was sold to a fellow in Indiana, just outside of Chicago. He began the process of restoring the car, doing some minor body work and paint on the rear of the car, including replacing the roof. He also had the seats and door panels re-done, the bumpers/guards/parking light housings re-chromed, and a Firedome motor partially re-built. He also located another fender and hood to replace the dented parts. At this point, he lost interest in the car and put it up for sale. In November 2002, my father purchased the car. After sitting for a while and me wanting a DeSoto, he sold me the car. On July 4, 2004, I officially began purchasing my first car at the age of 12. I didn't have much money at the time, but we decided to have the original engine rebuilt by a fellow who had done many early hemis and was starting to slow down in the number of motors he was rebuilding. We weren't in a hurry, so he worked on it on the side over the course of about a year and a half. He discovered the bad crank and broken main cap. Luckily though, the block was not cracked and I have since confirmed (I was 99% sure before) that the engine is original to the car. After that, the car sat virtually untouched for a few years while I was in high school. As I started college, I still didn't have much money, but I did have my summers free. So over the course of the 4 or so years going to school for engineering, I started to finish the motor. After progressing a bit, I discovered some things I wasn't happy with internally, such as lack of assembly lube and seized/dirty rockers. I can only chalk it up to the builder's declining health and memory because I know he had quite a reputation. After reversing some of my progress (I tore the engine down to the internals), I started assembling again. After graduating from college in February 2015 and paying off student loans, I started saving for body and paint work (I fully admit I cannot do this work and wouldn't start on this car even if I learned). In the meantime, I finished off the engine in October 2016 (see YouTube link below). In November 2016, I sent the car with Tim Bowers to Stellar Antique Auto Restorations in Windom, KS. Currently it is off the frame in varying stages of primer and rust repair. After the body and paint work are done, I will be doing final assembly.

My goal with the car is to do a nut-and-bolt restoration on the car back to 100% factory original, with the one exception being a set of glasspacks. It came white/yellow as shown in the photos with the white/black/silver cloth & leather interior. The car was very stripped down for a Sportsman, coming with mostly only what was standard for the model. I will not be adding a bunch of options and intend to stick with the factory colors.

Detailed restoration thread: ... 50&start=1

Engine first start:

File comment: The body blasted, in primer, and undergoing metal repair, August 2017.
10345.jpeg [ 77.15 KiB | Viewed 1464 times ]
File comment: Off the frame, February 2017.
16807337_1269451733144351_8115515701073650541_n.jpg [ 67.12 KiB | Viewed 1464 times ]
File comment: Sending it off with Tim Bowers to Stellar Antique Auto Restorations in Windom, KS, November 2016.
IMG_3772.JPG [ 2.43 MiB | Viewed 1464 times ]
File comment: The original engine, nearing completion in 2016.
IMG_2781.JPG [ 1.08 MiB | Viewed 1464 times ]
File comment: Me with my pride and joy, circa 2005-2006.
100_0330.JPG [ 721.05 KiB | Viewed 1464 times ]
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group