View topic - Carter WCD 884S

It is currently Wed Sep 19, 2018 7:13 pm

All times are UTC [ DST ]


Forum rules


The purpose of the National DeSoto Club, Inc. (NDC), is to encourage the preservation, restoration and promotion of all De Soto automobiles, as well as to promote fellowship and the exchange of knowledge among all fellow members. Furthermore, the study, compilation of data, summary of information, and preservation of literature related to De Soto automobiles is encouraged. The NDC’s message board is open to all. The NDC’s Trustees and members are NOT responsible for the accuracy of any of the information posted to this message board. The NDC’s web-master may, at his/her discretion, remove any message that is deemed to be offensive, and deny posting privileges to the person who posted the offensive message.



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Carter WCD 884S
PostPosted: Tue Feb 06, 2018 12:56 am 
Offline

Joined: Mon Feb 05, 2018 10:06 pm
Posts: 2
I've a 1952 Firedome with the 276 Hemi and fluid drive trans. The carburetor is a Carter WCD 884S ( I believe ) water cooled carb.
I feel the carb is in good shape as I've been able to make adjustments to it with positive results. My issues are now focused on the dashpot assembly and kickdown switch.
I recently took apart both assemblies for cleaning. The dash pot was OK electrically but I feel the bellows may be leaking. I'd cleaned everything I could and lubed what I could. Operation is fine enough but I believe it can be better.
The kick down switch was something else all together. After taking it apart I found a small phenolic plunger that operates on vacuum from the carb with a piece broken off. Not only that but the plunger was ticking in the shaft. I cleaned the shaft with some 0000 steel wool to remove the light corrosion and shined up other metal parts inside. The plunger - I was able to get it back together with a dab of super glue. After letting it set up, I lightly sanded what little flash it hand and polished it with the 0000 steel wool. It seemed to slide up and down just fine at that point. However I do not feel its operating at an efficient level.
So I've decided to hedge my bets and find another kick down switch and dash pot bellows assembly. Barring that, a dash pot rebuild kit. As I stated earlier, I believe the bellows is not in good enough shape.
My question to you all is this - Is there a reliable source out there for the dash pot? Otherwise I plan to re-create the bellows somehow. Knowing what material to use will be the challenge.
As far as the carburetor itself, I'm toying with the idea of a replacement ( non water cooled ) that utilizes the kick down and dash pot in conjunction with the fluid drive.


Top
 Profile  
 
 Post subject: Re: Carter WCD 884S
PostPosted: Tue Feb 06, 2018 2:35 am 
Offline

Joined: Mon Aug 09, 2010 6:43 pm
Posts: 959
Steve,

I've seen and purchased a couple dashpots on eBaY over the years. These are old stock items so there is no guarantee those rubber boots will be 100%. There are folks that rebuild vacuum advance units so I'd guess they could also rebuild dashpots.

Here are a few currently for sale on eBaY. Click or paste this link in your browser.
https://www.ebay.com/sch/i.html?_from=R ... t&_sacat=0

Mark


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group